Phải Làm gì: Nếu Bạn Gắn Moto G Chạy Android 5.0 Lollipop

The Moto G

An OTA update to Android 5.0 Lollipop has been released for the Moto G.  If a user is not familiar with the flashing methods for this update or has made a mistake flashing it, they will find that they will end up with a soft bricked device.

If you soft bricked your Moto G while installing the OTA update, it means that your device is now either running corrupted firmware or no firmware at all.  You can tell that it’s a case of softbricking if, when you turn on your device, you see a faint light come on screen.  If it’s  showing no sign of life, then you’ve hard bricked your device.

In this guide, were going to show you how you can fix a bricked Moto G on Android 5.0 Lollipop.  This will also work on a device running other versions below Android 4.4.4 KitKat.

Tải:

mfastboot: liên kết

Android 4.4.4 Kit-Kat Images: liên kết

Android 4.4.4 Kit-Kat update for Recovery: liên kết

Unbrick Moto G:

  1. Trích xuất Máy nhanh Tập tin mà bạn đã tải về.
  1. Tìm kiếm Firmware Images in the mfastboot folder and extract them.
  2. In the mfastboot folder, open a command prompt.
  3. Put your device into Fastboot mode by pressing and holding down the power key at the same time as both the volume keys
  4. Kết nối thiết bị của bạn với PC.
  5. Type and execute the following commands one-by-one:

mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Mboboot khởi động lại

  1. Reboot device. You might see the screen flickering while booting, don’t panic and just wait for the boot to finish.
  2. When the boot finishes, copy the Android 4.4.4 Kit-Kat updateyou downloaded onto your device
  1. Khởi động thiết bị Phục hồi chế độ lại.
  2. Chọn Apply Update from Sdcard.
  3. Đợi 10-15 phút for the process to finish.  When it is done, you will have successfully unbricked your Moto G

Have you unbricked your Moto G?

Chia sẻ kinh nghiệm của bạn trong hộp ý kiến ​​bên dưới.

JR

[embedyt] https://www.youtube.com/watch?v=laU6NQ0LxR0[/embedyt]

Giới thiệu về Tác giả

đáp lại

lỗi: Nội dung được bảo vệ !!